WC68 PTO Wood Chipper

Turn Brush Piles into Valuable Wood Chips — Fast

The Woodland Mills WC68 PTO Wood Chipper is built for serious land clearing. Designed to run off your tractor's PTO, it converts branches, brush, and woody debris into usable wood chips with minimal effort — leaving your property clean and your chip pile ready to work with.

Direct Drive. Full Torque. No Compromise.
The WC68 uses a direct drive configuration that transfers the full torque of your tractor PTO straight to the chipper drum — no belts, no power loss. The result is consistent, efficient chipping even through dense hardwood material.

Self-Contained Hydraulic Infeed
The WC68 features a self-contained hydraulic infeed system with a large 58 cm × 69 cm (23" × 27") hopper opening that tapers to 15 cm × 20 cm (6" × 8") — making it easy to feed multi-limbed branches without wrestling them into position. The 20 cm (8") diameter roller grabs and pulls branches through automatically. Feed material ranging from 6 mm (¼") up to 15 cm (6") in diameter. The infeed chute folds for compact transport and storage.

Note: Chipping full 15 cm (6") logs at full infeed speed requires a tractor with 40+ HP at the PTO.

Easy Hookup — Three-Point Hitch
The WC68 mounts via a 3-point hitch compatible with tractors rated at 20–50 PTO HP. The included PTO shaft can be cut to length to fit your tractor as per the manual.

Heavy-Duty Flywheel
At the heart of the WC68 is a dynamically balanced 61 cm (24") diameter, 2 cm (¾") thick solid steel flywheel running on a 5 cm (2") shaft, supported by two industrial greasable flanged bearings. Four CNC-machined blade pockets and four large fan blade paddles spin at 540 RPM for consistent chip output.

Four Reversible Hardened Steel Blades
Four high-quality hardened steel blades are spaced 90° apart and are fully reversible — giving you two cutting edges per blade for extended service life. Blades are secured with countersunk M10 bolts and locking nuts.

Blade changes are fast and safe thanks to the clamshell flywheel housing — undo one bolt and the upper housing foldeds open for full flywheel access. The flywheel locking pin holds the flywheel in position so every blade can be reached, reversed, or replaced without risk.

Ready to Work in Under Two Hours
The WC68 ships in a steel crate with the infeed and discharge chutes removed to prevent transit damage. Assembly is straightforward — most operators are up and running in as little as two hours.

The 360° rotating discharge chute can be aimed in any direction using two handles, so you can pile chips exactly where you want them regardless of chipper position.

Requires 20 L (5 gallons) of ISO 32 hydraulic oil (not included) — available at most farm or hardware stores.

Key Specifications

• Tractor compatibility: 20–50 HP PTO
• Max chipping diameter: 15 cm (6")
• Infeed hopper: 58 cm × 69 cm (23" × 27")
• Flywheel: 61 cm (24") diameter, solid steel, 540 RPM
• Blades: 4 reversible hardened steel blades
• Weight: 340 kg
• Finish: Powder coat paint

• Max Log Diameter: 15cm
• Hp Requirement: 20-50 HP
• PTO rpm: 540 rpm
• Flywheel Thickness: 2cm
• PTO Shaft: Included
• Numbers of Blades: 4 Reversible Blades
• Product Weight: 340kg

wc68-manual 2024 0012120.pdf

Link: All Manuals and Drawings

30 Day Guarantee

If you are not satisfied with the purchase of your Woodland Mills product, you can return it in its original packaging for a refund. Returns must be made within 30 days of the invoice date and the cost of shipping to and from the customer are non- refundable. Used accessories cannot be returned for refund. There is a limit of one return per customer.

Warranty

NOTE: Warranties are non-transferrable and are only applicable to the original purchaser.

Remedy

The remedy for this warranty is that Woodland Mills will at its discretion provide replacement parts to the original purchaser. This is a parts only warranty and excludes labour and/or other costs associated with replacing parts. Woodland Mills reserves the right to discontinue or change materials, parts, models, or products, or to make substitutions. Woodland Mills will ship replacement parts via a courier. Express shipping options may be available in certain regions and at an extra cost to the customer. Photos, videos, or the return of defective parts to Woodland Mills may be required for proper root cause and replacement. When defective parts are required to be returned, a pre-paid courier shipping label will be provided to the customer.

Warranty Limitations

This warranty does not apply to normal wear, commercial or rental use, after-market modification or damages that occur from negligence, misuse, or use not in accordance with the operating and maintenance instructions, or the products intended uses. Woodland Mills disclaims liability for any accidents, injury or damages to the equipment or personal property caused by the equipment when equipped with unauthorized parts, equipped with parts for unapproved purposes or modified in any other way. Woodland Mills will at its discretion make the final decision regarding warranty eligibility.

Disclaimer

Woodland Mills disclaims liability for any implied warranties, including implied warranties of ‘merchantability’ and ‘fitness for a specific purpose’ after the term of this Warranty.

Warranty Parts

Woodland Mills does its best to stock all parts, but in rare cases, parts may need to be ordered in and the customer will be notified upon arrival of required parts. Woodland Mills will not be liable for any damages associated with the unavailability of parts.

Warranty Exclusions

Wear items including, but not limited to belts, bearings, blades, bed plates, blade guide blocks, chainsaw chains, chainsaw bars, grinding teeth and tires are excluded from this warranty. Engines are not included within the Woodland Mills warranty.

Design Changes

Warrantor reserves the right to change the design of its products from time to time without notice and without obligation to make corresponding changes in or to its products previously manufactured.

Consequential Losses

Woodland Mills shall not be liable for any incidental or consequential losses, accidents, injury, damages, or expenses, arising directly or indirectly from the product, whether such claim is based upon breach of contract, breach of warranty, negligence, strict liability in tort or any other legal theory. Without limiting the generality of the foregoing, Woodland Mills specifically disclaims any damages relating to (i) lost profits, business, revenues, or goodwill; (ii) any expense or loss incurred for labour, supplies, substitute machinery or rental; or (iii) any other type of damage to property or economic loss.

Engine Warranty

Engines are covered by the manufacturer of the engine and covered by the warranty period specified by that manufacturer. All engine repairs, service and part replacements will not be done by Woodland Mills. The engine or complete piece of equipment must be taken to your local engine dealer to receive warranty consideration.